LEMON Manuals: Even more car manuals for everyone

Electrical Parking Switch Check

Observe the following chart to check the electric parking switch. If defective, replace the sift indicator panel.

G13121479Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Terminal number Item Electrical parking switch operation *Normal conditions
Continuity (Resistance) Illumination/extinction
4 - 5 Electrical parking switch (main) Don not press the switch Continuity exists (150 - 170 Ω) -
Press and hold the switch Continuity exists (5.9 - 6.6 kΩ) -
6 - 7 Electrical parking switch (sub) Don not press the switch Continuity exists (5.9 - 6.6 kΩ) -
Press and hold the switch Continuity exists (150 - 170 Ω) -
1 - 4 Indicator - No continuity Connect the connector to the electric parking switch. When the power supply mode of the electric motor switch is on or the ready indicator illuminates, the indicator must illuminate.
Connect the connectors to the electric parking switch and the selector lever assembly. When the power supply mode of the electric motor switch is turned on with the brake pedal depressed and the selector lever is tilted towards N position, the indicator must go out.
3 - 8 Illumination - No continuity Connect the connector to the electric parking switch. When the taillight illuminate, "P" must illuminate.