LEMON Manuals: Even more car manuals for everyone

Special Tools: Notes

Tool Tool number and name Supersession Application
G05093329
MB990767 Front hub and flange yoke holder MB990767-01 Fixing of the hub
G13121542
MB991618 Hub bolt remover General service tool Removal of the hub bolt
G13121543
MB992700 Lock nut chisel General service tool Raising up the swaged part driveshaft nut
G13121544
MB991897 or MB992011 Ball joint remover MB991113-01, MB990635-01 or General service tool Knuckle and tie rod end ball joint disconnection
NOTE: Steering linkage puller (MB990635 or MB991113) is also used to disconnect knuckle and tie rod end ball joint.
G13121545
MB990241 Axle shaft puller
  1. MB990242 Puller shaft
  2. MB990244 Puller bar
MB990241-01 or General service tool
  • Removal of the hub knuckle assembly
  • Removal of the driveshaft assembly
G13121546
MB991354 Puller body General service tool
G13121547
MB991056 or MB991355 Knuckle arm bridge MB991056-01 Removal of the hub
G13121548
MB992250 Knuckle arm bridge attachment - Removal of the hub
NOTE: Replace this attachment with a guide of MB991355 and use them.
G13121549
  1. MB991017
  2. MB990998
  3. MB991000 A, B: Front hub remover and installer
  4. Spacer
MB990998-01
  • Removal of the hub
  • Provisional holding of the wheel bearing
  • Measurement of hub starting torque
  • Measurement of wheel bearing end play
    NOTE: MB991000, which belongs to MB990998, should be used as a spacer.
  • Removal of the wheel bearing inner race (outside) (Use MB991000 with MD998801.)
G13121550
MB991099 Oil seal installer guide - Measurement of hub starting torque
G13121551
MB990326 Preload socket General service tool
G13121552
MD998801 Remover - Removal of the wheel bearing inner race (outside)
G13121553
MB992150 Oil seal installer - Installation of the wheel bearing inner race (outside)
G13121554
MD998812 Installer cap -
G13121555
MD998813 Installer -
G13121556
MB990925 Bearing and oil seal installer set MB990925-01 or General service tool Removal of the wheel bearing
G13121557
MB991388 Bush remover base - Installation of the dust shield
G13121558
MB991576 Base -
G13121559
MB990890 Rear suspension bushing base MB990890-01 Installation of the wheel bearing
G13121560
MD999528 Adapter -
G13121561
MB991561 Boot band crimping tool MB991561 BJ boot (resin boot) band installation