LEMON Manuals: Even more car manuals for everyone

Message Screen For External Discharge Function

If power supply by the external power supply is not started even when executing the external discharge function, the following message is displayed on the application screen.

Message displayed Factor Action
G13124503
The PHEV-ECU did not return a response when the EV remote-ECU sent the request to start the external power supply function to the PHEV-ECU as a possible cause. The PHEV-ECU, CAN bus lines, gateway (ETACS-ECU), or on board charger/DC-DC converter may be defective. Troubleshoot the EV remote-ECU (Refer to INSPECTION PROCEDURE "THE EXTERNAL POWER SUPPLY FUNCTION IS NOT STARTED (EXECUTION BUTTON OPERATION IS POSSIBLE)." ).
G13124504
If the power supply hasn't started although the screen on the left is displayed, the following causes are suspected.
  • The external power supply does not support this function.
  • The quick charging connector of the external power supply is not connected to the vehicle tightly.
  • More than 5 minutes have passed since the ON button was pressed.
  • The 12V starter battery in the vehicle has low voltage.
  • There are some errors in the external power supply or vehicle.
  • Confirm that the external power supply is compatible model.