LEMON Manuals: Even more car manuals for everyone

Removal And Installation: Notes

CAUTION:
  • The parts indicated by *1 should be temporarily tightened, and then fully tightened with the vehicle standing on the ground and the curb weight condition.
  • The parts indicated by *2 are the bolts with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from the bearing and thread surfaces, and tighten them to the specified torque.
Fig 1: Exploded View Of Lower Arm With Torque Specifications
G09631690Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools: