LEMON Manuals: Even more car manuals for everyone

Service Specifications

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS

Item Standard value Limit
Steering wheel free play mm (in) With engine running - 30 (1.2) or less
With engine stopped 16.5 (0.65) or less -
Steering angle Inner wheel 33°10' ± 1°30' (Left/right deviation within 2°00') -
Outer wheel (reference value) 28°10' -
Toe-in mm (in) 0 ± 2 (0 ± 0.08) -
Tie-rod looseness mm (in) Within ± 2.0 (0.08) -
Tie rod end ball joint breakaway torque N.m (in-lb) 2.9 (26) or less -
Engine idle speed r/min 700 ± 100 -
Stationary steering effort N (lb) [Fluctuation allowance N (lb)] 32 (7.2) or less [5.9 (1.33) or less] -
Oil pump pressure MPa (psi) Oil pump relief pressure 8.1 - 8.8 (1, 175 - 1, 276) -
Pressure under no-load conditions 1.0 (145) -
Steering gear retention hydraulic pressure 8.1 - 8.8 (1, 175 - 1, 276) -
Oil pressure switch operating pressure MPa (psi) OFF → ON 2.5 - 3.0 (363 - 435) -
ON → OFF 1.5 - 3.0 (218 - 435) -
Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] 0.6 - 1.6 (5.3 - 14.2) [0.4 (3.5) or less] -
Band crimped width mm (in) 2.4 - 2.8 (0.09 - 0.11) -