LEMON Manuals: Even more car manuals for everyone

>> C << Pulley Installation

  1. Clean the inner race of the front bearing and that of the pulley.
  2. Screws the inner race of the pulley until it touches the inner race of the front bearing.
    Fig 1: Cleaning Inner Race Of Front Bearing
    G07033894Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Pulley
    G07033895Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Set the special tool MB992226 to the pulley.
    Fig 3: Removing Pulley Using Special Tool MB992226
    G07033886Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Set the closed wrench to the hexagonal area of the special tool MB992226.
    Fig 4: Setting Closed Wrench To Hexagonal Area Using Special Tool MB992226
    G05375406Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Insert the hexagonal bit socket having width across flats of 10 mm (0.4 inch) into the hexagonal area of the rotor shaft.
  6. Hold the pulley with the closed wrench.

    Rotate the hexagonal bit socket counterclockwise to tighten it to the specified torque.

    Specified torque: 73 ± 12 N.m (54 ± 8 ft-lb) 

    Fig 5: Rotating Hexagonal Bit Socket Counterclockwise
    G05375417Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.