LEMON Manuals: Even more car manuals for everyone

Special Tools

SPECIAL TOOLS

Tool Tool number and name Supersession Application
G07032515Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III sub assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Daimler Chrysler models only)
  6. M.U.T.-III measurement adapter
  7. M.U.T.-III trigger harness
MB991824-KIT
NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION: M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle.
ABS system diagnostics
G05384141Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991223
  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222

Harness set
  1. Test harness
  2. LED harness
  3. LED harness adaptor
  4. Probe
General service tools Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
  1. Connector pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection
G07032517Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992006
Extra fine probe
- Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
G04871980Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991974
ABS check harness
- Measure the voltage and resistance at the ABS-ECU
G07032519Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991709
Wiring harness set
- Output current measure at the wheel speed sensor