LEMON Manuals: Even more car manuals for everyone

Power Window Operating Current Check

  1. Remove the power window fuse, and connect a multimeter as shown in the illustration.
  2. Raise the power window to measure the current during operation.

    Standard value (A): 7 A or less [Power supply voltage 14.5 ± 0.5V, 25°C (77°F)] 

    NOTE: If the power supply voltage does not meet the standard value, check and repair the generator and the battery. Then carry out this check again.
    Fig 1: Identifying Power Window Fuse And ETACS-ECU
    G05384152Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If the operation current is outside the standard value, refer to POWER WINDOW DIAGNOSIS  .