9. Engine Oil (Change)
Use the specified oil. (Refer to RECOMMENDED LUBRICANTS AND LUBRICANT CAPACITIES TABLE .)
WARNING:
Use care. Oil could be hot.
- After warming up the engine, remove the oil filler cap.
- Remove the drain plug to allow the engine oil to drain.
- Install a new drain plug gasket so that it faces in the direction shown in the illustration, and then tighten the drain plug to the specified torque.
Tightening torque: 39 +/- 5 N.m (29 +/- 3 ft-lb)
- Pour new engine oil in through the oil filler tube.
Specified Engine Oil: Engine oils conforming ILSAC GF-3 certification or the API classification SL, SL/CF Total quantity: 4.3 dm 3 (4.5 quarts)
- Install the engine oil filler cap.
- Start the engine and run it at idle for a few minutes.
- Pull out the oil dipstick slowly and check that the oil level is within the marks on the oil dipstick.
- Check that the oil is not excessively dirty, that there is no coolant or gasoline mixed in, and that it is sufficiently thick and slippery.