LEMON Manuals: Even more car manuals for everyone

Transponder Lock Check

Required Special Tools: 

CAUTION: To prevent damage to scan tool MB991958, always turn the ignition switch to "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.

Follow the procedure below to judge if the ignition key can be overwritten (i.e. the ignition key is correct) or not.

  1. Connect the scan tool MB991958 to the data link connector.
  2. Turn the ignition switch to "ON" position.
  3. Select "Interactive Diagnosis" from the start-up screen.
    Fig 1: Connecting Scan Tool To Data Link Connector
    G04231129Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Select "System select."
    Fig 2: Display - System Select
    G04289435Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Choose "IMMOBILIZER" from the "POWER TRAIN" tab.
    Fig 3: Display - Immobilizer From Power Train
    G04289436Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. Select "Data List."
    Fig 4: Display - Data List
    G04289437Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  7. The multi-center display shows whether the ignition key, which has been inserted in the switch, can be rewritten and how many ignition keys have ever been registered.
    IGNITION KEY REFERENCE

    TP LOCK CHECK IGNITION KEY: JUDGMENT OF IGNITION KEY
    UNLOCK Can be overwritten Correct
    LOCK Can not be overwritten Incorrect
    Fig 5: Display - Data List
    G04289438Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.