LEMON Manuals: Even more car manuals for everyone

Special Tools

SPECIAL TOOLS

TOOL TOOL NUMBER AND NAME SUPERSESSION APPLICATION
A
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

B
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

C
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

D
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

E
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

F
G04289533G04289534G04289535G04289536G04289537G04289538G04289539

G
G04289533G04289534G04289535G04289536G04289537G04289538G04289539
MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

M.U.T.-III sub assembly
  1. Vehicle communication interface (V.C.I.)
  2. M.U.T.-III USB cable
  3. M.U.T.-III main harness A (Vehicles with CAN communication system)
  4. M.U.T.-III main harness B (Vehicles without CAN communication system)
  5. M.U.T.-III main harness C (for Daimler Chrysler models only)
  6. M.U.T.-III adapter harness
  7. M.U.T.-III trigger harness
MB991824-KIT
NOTE: G: MB991826 M.U.T.-III trigger harness is not necessary when pushing V.C.I. ENTER key.
  • Reading diagnostic trouble code
  • Estimated vehicle speed sent
CAUTION: M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle.
A
G04289540G04289541G04289542G04289543

B
G04289540G04289541G04289542G04289543

C
G04289540G04289541G04289542G04289543

D
G04289540G04289541G04289542G04289543
MB991223
  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222

Harness set
  1. Test harness
  2. LED harness
  3. LED harness adapter
  4. Probe
General service tool (jumper) Making voltage and resistance measurements during troubleshooting
  1. Connect pin contact pressure inspection
  2. Power circuit inspection
  3. Power circuit inspection
  4. Commercial tester connection
G04289544
MB992006
Extra fine probe
- Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.