Special Tools
SPECIAL TOOLS SPECIFICATION
| TOOL | TOOL NUMBER AND NAME | SUPERSESSION | APPLICATION |
|---|---|---|---|
MB991958
M.U.T.-III sub assembly
|
MB991824-KIT
NOTE:
G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
|
Checking diagnostic trouble codes
CAUTION:
For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
|
|
MB991223
Harness set
|
General service tools | Checking the continuity and measuring the voltage at the harness connector | |
| MB992006 Extra fine probe |
- | Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector. | |
| MB991923 Power plant ECU check harness |
Measuring the terminal voltage at the PCM | ||
| MB991658 Test harness |
Tool not available | Checking throttle position sensor |