LEMON Manuals: Even more car manuals for everyone

A/T Control Relay

NOTE: For circuit reference, see CONNECTOR IDENTIFICATION  and/or WIRING DIAGRAMS  .

Remove A/T control relay. Using fused jumper wires, connect relay terminal No. 2 to battery positive, and terminal No. 3 to battery negative. See Fig 1. Ensure continuity is present between relay terminals No. 1 and 4. Continuity should not be present with jumper wires removed. Replace relay if continuity is not as specified.

Fig 1: Testing A/T Control Relay
G99A51482Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.