LEMON Manuals: Even more car manuals for everyone

System Diagnosis: Notes

WARNING: This page is about a different car, the 1992 Plymouth Colt, 1992 Eagle Summit, and 1992 Dodge Colt. However, it is still accessible from the selected car via links, so may be relevant.

Use Chrysler Motors code charts when using Chrysler's Diagnostic Readout Box (DRB-II). If DRB-II is not available, system diagnosis can be accomplished using a voltmeter. To perform self-diagnostics using a voltmeter, see RETRIEVING CODES (USING VOLTMETER)  .

NOTE: Chrysler Motors recommends using DRB-II to diagnose system. Voltmeter usage has limited diagnostic capabilities, but can be used if DRB-II is not available.

Engine Control Unit (ECU) monitors several different engine control system circuits. If an abnormal input signal occurs, a fault code is stored in ECU memory and given a fault code number. Each circuit has its own fault number and message. A fault code does not condemn any specific component; it simply points out a probable malfunctioning area.

Fault codes can be confirmed by using a voltmeter or Chrysler's Diagnostic Readout Box (DRB-II). See RETRIEVING CODES (USING VOLTMETER)  or RETRIEVING CODES (USING DRB-II)  . By using DRB-II, self-diagnostic capabilities of this system can simplify testing and reduce diagnostic time.

System malfunctions encountered are identified as either hard failures or intermittent failures as determined by ECU.