Description & Operation
With the ignition switch in the on position press either the up or down side of the power window (main or sub) switch. Electric current will then flow through fusible link No. 7 to the power window motor and will operate the power window motor to open or close the power window glass. Press the DOWN side of the power window main switch located on the driver's seat side. Then the switch will lock and the power window motor will continue to operate until the window glass is fully open.
To disable both the main and sub switches except the one located at the driver's seat place the power window lock switch in the LOCK/ON position. With the switch in this position, the power window motor will no longer operate even if the switches are operated.
The power window motor has a circuit breaker to prevent damage to the motor due to overcurrent. Reference: Characteristics of the Circuit Breaker at normal temperatures 68-77°F (20-25°C), bind the motor. Supply current, then the circuit breaker will cut off the current in the first 4 to 40 seconds. The circuit breaker, if left alone, will reset in less than 60 seconds.