GR_CM in DRIVE MODE
This OSC function is used to test the transmission shift functions.
The OSC functions for the GR__CM parameter allows the technician to choose the following options:
- [1] - PCM selects 1st gear.
- [2] - PCM selects 2nd gear.
- [3] - PCM selects 3rd gear.
- [4] - PCM selects 4th gear.
OSC "GR_CM" Mode operates ONLY when:
- The digital TR sensor is operational and no digital TR sensor DTCs are present.
- The vehicle speed sensor is operational and no VSS sensor DTCs are present.
- The engine is ON.
- The TCC is OFF.
- The transmission range selector lever is in O/D.
- The vehicle speed is greater than 3.2 km/h (2 mph).
OSC Command Values
- [1] - PCM selects 1st gear.
- [2] - PCM selects 2nd gear.
- [3] - PCM selects 3rd gear.
- [4] - PCM selects 4th gear.
- [XXX] - cancels OSC value sent.
- [SEND] - sends the values to PCM.