Rack Preload
With steering gear removed from chassis, measure pinion turning torque using an INCH lb. torque wrench and Pinion Adapter (T87C-3504-C). Pinion turning torque should be 0.52-1.3 INCH lbs. (0.6-1.5 N.m). If turning torque is not within specification, adjust the rack yoke adjusting plug. Tighten adjusting plug lock nut to 29-36 ft. lbs. (39-49 N.m).
NOTE:
Rack preload adjustment will seldom cure hard steering or poor steering wheel return. Always check for rack damage or tight universal joints. Also check for damage or binding steering column or suspension components.