LEMON Manuals: Even more car manuals for everyone

Section 5 (Engine Controls - System/Component Tests - 3.0L): Introduction

WARNING: This page is about a different variant/trim than selected.

Before testing separate components or systems, perform preliminary inspection procedures. Since many computer-controlled and monitored components set a trouble code if they malfunction, also perform procedures in the TESTS W/CODES - 3.0L article.

NOTE: Testing individual components does not isolate shorts or opens. Perform all resistance tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure. Use ohmmeter to isolate wiring harness shorts or opens.