LEMON Manuals: Even more car manuals for everyone

Section 14 (Engine Controls - Tests W/Codes - 2.3L): Introduction

WARNING: This page is about a different car, the 1992 Mercedes-Benz 190E. However, it is still accessible from the selected car via links, so may be relevant.

If no faults were found while performing preliminary inspection, go to RETRIEVING CODES  in this article. If no fault codes or only pass codes are present, go to the TESTS W/O CODES article for diagnosis by symptom (i.e., ROUGH IDLE, NO START, etc.).

NOTE: All voltage tests should be performed with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless specifically stated different in testing procedures.