LEMON Manuals: Even more car manuals for everyone

Time Lag Test

  1. Perform mechanical system test preparation. (See MECHANICAL SYSTEM TEST PREPARATION .)
  2. Start the engine.
  3. Shift the selector lever from the N position to the D position with the brake pedal depressed.
  4. Measure the time until the shift shock is felt firmly after shifting.
  5. Measure the time lag from the N position to the R position using the same procedure.
    • If there is any malfunction, one of the following causes may have occurred:
Condition Possible Cause
N → D shift
  • Insufficient line pressure
  • C1 clutch malfunction (slippage)
  • F3 one-way clutch malfunction
N → R shift
  • Insufficient line pressure
  • C1 clutch malfunction (slippage)
  • C3 clutch malfunction (slippage)
  • F1 one-way clutch malfunction

Time lag 

N position → D position: 0.7 s or less

N position → R position: 1.2 s or less