LEMON Manuals: Even more car manuals for everyone

Intermediate Shaft (Lower) Installation Note

  1. Install the intermediate shaft (lower) to the intermediate shaft (upper).
  2. Install the intermediate shaft (lower) with the alignment marks on the clip and steering gear (pinion), which were marked before removing the intermediate shaft (lower), aligned.
    G14589616Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • When replacing the intermediate shaft (lower) with a new one, place alignment marks on the new part in the same position as the removed intermediate shaft (lower).
    G14589617Courtesy of MAZDA MOTORS CORP.
  3. Verify that the semicircular shape of the clip and U-shape groove of the steering gear (pinion) matches and joint bolt B can be inserted.
    Fig 1: Steering Gear (Pinion), Intermediate Shaft (Lower) And Joint Bolt B With Torque Specifications
    G14589618Courtesy of MAZDA MOTORS CORP.
  4. Install the joint bolt B.
  5. Install the joint bolt A.
Fig 2: Intermediate Shaft (Upper And Lower) And Joint Bolt A With Torque Specifications
G14589619Courtesy of MAZDA MOTORS CORP.