LEMON Manuals: Even more car manuals for everyone

Diagnostic Procedure

HIGH OIL CONSUMPTION/LEAKAGE (SKYACTIV-G) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 VERIFY IF MALFUNCTION CAUSED BY ENGINE OIL OR RELATED PART MALFUNCTION 
  • Inspect the following:
    • Proper oil level gauge
    • Engine oil viscosity
    • Engine oil level
  • Are all items normal?
Yes Go to the next step.
No Repair or replace the malfunctioning location, then repeat this step.
2 VERIFY IF MALFUNCTION CAUSED BY ENGINE OIL LEAKAGE 
  • Inspect for engine oil leakage from the outside of the engine.
  • Is there engine oil leakage?
Yes Repair or replace the malfunctioning location and perform the repair completion verification 1.
No Go to the next step.
3 VERIFY IF MALFUNCTION CAUSED BY PCV VALVE OR ENGINE INTERNAL MALFUNCTION  Yes Inspect for the following engine internal parts:
  • Cylinder
  • Piston ring
  • Intake valve
  • Exhaust valve
  • Cylinder head gasket

    If there is any malfunction: 

  • Repair or replace the malfunctioning location and perform the repair completion verification 1.
No Replace the PCV valve and perform the repair completion verification 1.
(Refer to POSITIVE CRANKCASE VENTILATION (PCV) VALVE REMOVAL/INSTALLATION [SKYACTIV-G 2.0] in service information.)
Repair completion verification 1 VERIFY THAT VEHICLE IS REPAIRED 
  • Install/connect the part removed/disconnected during the troubleshooting procedure.
  • Has the malfunction symptom been eliminated?
Yes Complete the symptom troubleshooting. (Explain contents of repair to customer)
No Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
(See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .)