LEMON Manuals: Even more car manuals for everyone

Details On DTCs

U1032-00: (PCM (SKYACTIV-G)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Vehicle control module (VCM) error
Detection condition Determination conditions
  • Any one of the following conditions is met:
    • CAN communication line malfunction between vehicle control module (VCM) and PCM
    • Vehicle control module (VCM) internal malfunction (built-into body control module (BCM))
Preconditions
  • The following conditions continue for 1.5 s:
    • Battery voltage: above 9.45 V*1
    • Switch the ignition ON (engine off or on).
*1 : Standard can be verified by displaying PIDs using M-MDS
Malfunction determination period
  • 2 s period
Drive cycle
  • 1
Self test type
  • CMDTC self test, KOEO self test, KOER self test
Sensor used
  • PCM
Fail-safe
  • Inhibits engine-stop by operating the i-stop function. (With i-stop system)
Vehicle status when DTCs are output
  • Not applicable
Possible cause
  • CAN drive error (vehicle control module (VCM) or PCM)
  • Malfunction in CAN communication line between vehicle control module (VCM) and PCM
  • Body control module (BCM) connector or terminal malfunction
  • PCM connector or terminal malfunction
  • Vehicle control module (VCM) malfunction (built-into body control module (BCM))
  • PCM malfunction