DTC P2109-00: TP Sensor Minimum Stop Range/Performance Problem: Notes
P2109-00: (PCM (SKYACTIV-G)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
TP sensor minimum stop range/performance problem |
| Detection condition |
- The fully-closed throttle position is outside the specified range even though the fully-closed throttle position learning is completed.
|
| Fail-safe |
- Restricts the upper limit of the engine speed.
- Stops the drive-by-wire control (throttle valve is open at approx. 8° by return spring force).
|
| Possible cause |
- DTCs are stored in the PCM. (other than P2109-00:) (See DTC TABLE [PCM (SKYACTIV-G)]
.)
- Malfunction in wiring harness (including connector/terminal) between throttle body and PCM (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Throttle valve actuator malfunction (Refer to [THROTTLE VALVE INSPECTION]
in service information.)
- Throttle body malfunction (throttle valve malfunction) (Refer to [INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
] in service information.)
- PCM malfunction (Refer to PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
in service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOEO or KOER self test. (See DTC INSPECTION
.)
|
Courtesy of MAZDA MOTORS CORP.
|
| 1 |
PCM |
| 2 |
Throttle body (throttle valve actuator) |