LEMON Manuals: Even more car manuals for everyone

Function Inspection Using M-MDS

P0A8D-00: (PCM (SKYACTIV-G)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY 
  • Verify related Service Bulletins, on-line repair information, or Service Information availability.
  • Is any related Information available?
Yes Perform repair or diagnosis according to the available information.
  • If the vehicle is not repaired, go to the next step.
No Go to the next step.
2 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
    NOTE:
    • Recording can be facilitated using the screen capture function of the PC.
- Go to the next step.
3 PURPOSE: VERIFY IF POWER SUPPLY IS AFFECTED BY DTC RELATED TO DC-DC CONVERTER (i-ELOOP) 
  • Perform the DTC inspection for the DC-DC converter (i-ELOOP). (See DTC INSPECTION .)
  • Are any DTCs displayed?
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [DCDC] .)
Go to the next step.
No Go to the next step.
4 PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CURRENT SENSOR 
  • Perform the DTC inspection for the PCM.

    (See DTC INSPECTION .)

  • Are any of the following DTCs displayed?
    • P058A-00:
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See P058A-00: [PCM (SKYACTIV-G)] .)
Go to the next step.
No Go to the next step.
5 PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CAN OR LIN COMMUNICATION 
  • Perform the DTC inspection for the PCM.

    (See DTC INSPECTION .)

  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [PCM (SKYACTIV-G)] .)
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.