LEMON Manuals: Even more car manuals for everyone

Intention of troubleshooting procedure

P064D-00: (PCM (SKYACTIV-G)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: PERFORM DTC INSPECTION AND VERIFY IF MALFUNCTIONING PART IS PCM 
  • Clear the DTC recorded in the memory.

    (See CLEARING DTC .)

  • Replicate the vehicle conditions at the time the DTC was detected using the following procedure.
  • Perform the DTC inspection for the PCM.

    (See DTC INSPECTION .)

  • Is the same Pending DTC present?
Yes Refer to the controller area network (CAN) malfunction diagnosis flow to inspect for a CAN communication error.
(See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .)
If the CAN communication is normal, replace the PCM and perform the repair completion verification 1.
(Refer to PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0] in service information.)
No Go to the next step.
Repair completion verification 1 PURPOSE: VERIFY IF OTHER DTCs DISPLAYED 
  • Perform the DTC inspection. (See DTC INSPECTION .)
  • Are any other DTCs displayed?
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
No DTC troubleshooting completed.