DTC P0340-00: Intake CMP Sensor Circuit Problem
P0340-00: (PCM (SKYACTIV-G)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Intake CMP sensor circuit problem |
| Detection condition |
- The intake camshaft position sensor input signal pattern received during specified rotation of the crankshaft is incorrect.
|
| Fail-safe |
- Stops fuel injection
- Stops ignition
- Sets the electric variable valve timing control to the maximum cam retard mode.
- Inhibits traction control.
|
| Possible cause |
- Malfunction in wiring harness (including connector/terminal) between sub relay and intake CMP sensor (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Malfunction in wiring harness (including connector/terminal) between intake CMP sensor and PCM (See CIRCUIT INSPECTION
.) (See CONNECTOR INSPECTION
.)
- Intake CMP sensor malfunction (Refer to CAMSHAFT POSITION (CMP) SENSOR INSPECTION [SKYACTIV-G 2.0]
in service information.)
- Dirt on intake CMP sensor detection area
- Damage to the detection area of the intake CMP sensor
- Intake CMP sensor pulse wheel malfunction
- CKP sensor connector malfunction (See CONNECTOR INSPECTION
.)
- Loose timing chain (Refer to TIMING CHAIN REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
in service information.)
- Improper intake valve timing
- PCM malfunction (Refer to PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0]
in service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
- Perform the KOER self test. (See DTC INSPECTION
.)
|
Courtesy of MAZDA MOTORS CORP.
|
| 1 |
Battery |
| 2 |
Sub relay |
| 3 |
Intake CMP sensor |
| 4 |
PCM |