LEMON Manuals: Even more car manuals for everyone

Function Inspection Using M-MDS

B10A2-00: (PCM (SKYACTIV-G)) DIAGNOSTIC PROCEDURE

Step Inspection Results Action
1 PURPOSE: VERIFY RELATED REPAIR INFORMATION OR SERVICE INFORMATION AVAILABILITY 
  • Verify related Service Bulletins, on-line repair information, or Service Information availability.
  • Is any related Information available?
Yes Perform repair or diagnosis according to the available information.
  • If the vehicle is not repaired, go to the next step.
No Go to the next step.
2 PURPOSE: RECORD VEHICLE STATUS WHEN DTC WAS DETECTED TO UTILIZE WITH REPEATABILITY VERIFICATION 
  • Record the freeze frame data/snapshot data.
    NOTE:
    • Recording can be facilitated using the screen capture function of the PC.
- Go to the next step.
3 PURPOSE: VERIFY IF OPERATION IS NORMAL AFTER VEHICLE COLLISION 
  • Ask customer about vehicle collision experience.
  • Has the vehicle in for servicing been involved in a collision in which the air bag is deployed?
Yes Explain to the customer that the DTC is recorded as a result of a vehicle collision.
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to the next step.
4 PURPOSE: VERIFY OTHER SAS CONTROL MODULE DTCs 
  • Perform the DTC inspection for the SAS control module. (See DTC INSPECTION .)
  • Are any DTCs displayed?
Yes Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
(See DTC TABLE [SAS] .)
Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.
No Go to Troubleshooting Diagnostic Procedure to perform the procedure from Step 1.