LEMON Manuals: Even more car manuals for everyone

Rear Housing Installation Note

NOTE:
  • After applying silicone sealant, install the rear housing within 10 min. and then tighten all bolts within 5 min.
  1. Apply silicone sealant to the areas shown in the figure.
    G14588267Courtesy of MAZDA MOTORS CORP.

    Thickness 

    3.0-7.0 mm {0.12-0.27 in}

  2. Install the rear housing.
  3. Tighten the rear housing installation bolts.

    Rear housing installation bolt tightening torque 

    20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}

  4. Install the exhaust CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  5. Install the insulator.
Fig 1: Insulator And Bolts With Torque Specifications
G14588268Courtesy of MAZDA MOTORS CORP.