LEMON Manuals: Even more car manuals for everyone

Exhaust System Insulator Removal/Installation: Notes

  1. Remove the shift.
  2. Remove the propeller shaft. (See PROPELLER SHAFT REMOVAL/INSTALLATION .)
  3. Remove the power plant frame. (See POWER PLANT FRAME REMOVAL/INSTALLATION [SJ6A-EL] .) (See POWER PLANT FRAME REMOVAL [M66M-D] .) (See POWER PLANT FRAME INSTALLATION [M66M-D] .)
  4. Remove the exhaust system insulator in the order shown in the figure.
  5. Install in the reverse order of removal.
    Fig 1: Insulator Components Location With Torque Specifications
    G14588279Courtesy of MAZDA MOTORS CORP.
    COMPONENT OPERATIONS

    Component no. Refer to
    1 Insulator (rear)
    (See INSULATOR (REAR) REMOVAL NOTE .)
    2 Insulator (middle)
    3 Insulator (front)