Remove Passenger Side Strut Tower Bar: Notes
- Remove using the procedure shown in the figure.
- The figure shows the right side (same as left side).
TIGHTENING TORQUE SPECIFICATIONSStep Part name Applicable condition 1 Connector With windshield wiper de-icer - 2 Wiring harness clip
(See Wiring harness clip removal note ).- - 3 Bolt - 35 N.m {3.55 kgf.m, 25.8 ft.lbf} 4 Nut - 35 N.m {3.55 kgf.m, 25.8 ft.lbf} 5 Strut tower bar - -