Transfer Oil Replacement [Mm8AX-EC]
- Remove the front under cover No. 3. (See REMOVE FRONT UNDER COVER NO. 3 .)
- Remove the floor under cover. (See FLOOR UNDER COVER REMOVAL/INSTALLATION .)
- Drain the transfer oil using the procedure shown in the figure.PART NAME DESCRIPTION
Procedure Part name 1 Drain plug 2 Washer 3 Transfer oil - After draining, install the drain plug and a new washer.TIGHTENING TORQUE SPECIFICATIONS
Procedure Part name 1 Washer Replacement part - 2 Drain plug - 49 N.m {5 kgf.m, 36.15 ft.lbf} - Remove the oil level plug and washer.TIGHTENING TORQUE SPECIFICATIONS
Procedure Part name 1 Oil level plug 2 Washer - Add transfer oil.TRANSFER OIL AMOUNT (REFERENCE)
Transfer oil Transfer oil amount (reference) Genuine ATF A7 0.46-0.56 L {0.49-0.59 US qt, 0.41-0.49 Imp qt} - Verify that there is transfer oil around the oil level plug installation hole by hand.
- Remove the oil level plug and a new washer.TIGHTENING TORQUE SPECIFICATIONS
Procedure Part name 1 Washer Replacement part - 2 Oil level plug - 49 N.m {5 kgf.m, 36.15 ft.lbf} - Install the floor under cover. (See FLOOR UNDER COVER REMOVAL/INSTALLATION .)
- Install the front under cover No. 3. (See REMOVE FRONT UNDER COVER NO. 3 .)