LEMON Manuals: Even more car manuals for everyone

EGR Pressure Sensor Removal/Installation

  1. Remove the cowl grille cover (RH). (See COWL GRILLE REMOVAL/INSTALLATION .)
  2. Open the capsule cover. (See CAPSULE COVER OPEN/CLOSE [H3T] .)
  3. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  4. Remove in the order indicated in the table.
    Fig 1: EGR Pressure Sensor With Torque Specifications
    G16707784Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATIONS

    Step Part name
    1 Connector -
    2 EGR pressure sensor 13.5 N.m {138 kgf.m, 119 ft.lbf}
  5. Install in the reverse order of removal.