LEMON Manuals: Even more car manuals for everyone

Remote Tuner (Rt) Removal/Installation: Hatchback-5HB

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  2. Remove the following parts:
    1. Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION .)
    2. Trunk side upper trim (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION .)
    3. C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION .)
  3. Remove the screws.
    Fig 1: Remote Tuner (RT) Bolts With Torque Specification
    G13718353Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolts.
  5. Remove the wiring harness clip A and B.
  6. Disconnect the connectors.
  7. When removing the bracket A and B, perform the following procedure:
    1. Remove the screws.
      G13718354Courtesy of MAZDA MOTORS CORP.
    2. Remove the bracket A.
    3. Remove the screws.
    4. Remove the bracket B.
  8. Install in the reverse order of removal.
  9. If the remote tuner is replaced, contact Sirius XM dealer support and tell them the radio ID and VIN. (With Sirius XM satellite radio) (See RADIO ID VERIFICATION PROCEDURE .)