LEMON Manuals: Even more car manuals for everyone

Diagnostic procedure

Step Inspection Action
1 INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY
  • Is any DTC not shown in the DTC table displayed simultaneously?
Yes Go to the next step.
No Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM)] ).
2 VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE
Yes Go to the next step.
No DTC troubleshooting completed.
3 VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR
Yes Re-perform the configuration, then perform the DTC inspection.
No DTC troubleshooting completed.