LEMON Manuals: Even more car manuals for everyone

Control Rod Component, Nut and Washer Installation Note

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the control rod component and washer.
    Fig 1: Installing Control Rod Component And Washer
    G10952982Courtesy of MAZDA MOTORS CORP.
  2. Secure the control rod component with an adjustable wrench and tighten the control rod nut as shown in the figure.
Fig 2: Securing Control Rod Component With Adjustable Wrench
G10952983Courtesy of MAZDA MOTORS CORP.
CAUTION:
  • Do not use an impact wrench.
  • When tightening the control rod nut, secure the control rod component without applying torque within the AT.

    Tightening torque

  • 14-18 N.m {1.5-1.8 kgf.m, 11-13 ft.lbf}