LEMON Manuals: Even more car manuals for everyone

EGR Valve Removal/Installation

  1. Disconnect the negative battery terminal. (Refer to NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (Refer to PLUG HOLE PLATE REMOVAL/INSTALLATION .)
  3. Remove the bolts and clips shown in the figure and remove the wiring harness bracket.
    Fig 1: Identifying Wiring Harness Bracket Bolts With Torque Specifications
    G10946949Courtesy of MAZDA MOTORS CORP.
  4. Remove in the order indicated in the table.
    Fig 2: EGR Valve Components With Torque Specifications
    G10946950Courtesy of MAZDA MOTORS CORP.
    COMPONENT DESCRIPTION

    1 EGR valve connector
    2 EGR valve
  5. Install in the reverse order of removal.