LEMON Manuals: Even more car manuals for everyone

Diagnostic procedure

STEP INSPECTION ACTION
1 ALLOW VEHICLE TO COOL DOWN 
  • Switch the ignition OFF and allow the vehicle to cool down.
Go to the next step.
2 VERIFY DTC TROUBLESHOOTING COMPLETED 
Yes Replace the AWD control module, then go to the next step.
(Refer to AWD CONTROL MODULE REMOVAL/INSTALLATION .)
No Go to the next step.
3 VERIFY NO DTC IS PRESENT 
  • Are any DTCs present?
Yes Go to the applicable DTC inspection.
(Refer to DTC TABLE [ELECTRONIC AWD CONTROL SYSTEM] .)
No DTC troubleshooting completed.