LEMON Manuals: Even more car manuals for everyone

Pcm Removal/Installation: Notes

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  3. Disconnect the PCM connector. (See PCM CONNECTOR CONNECTION NOTE .)
  4. Remove the battery. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  5. Remove the battery tray and PCM component. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  6. Remove in the order indicated in the table.
    Fig 1: Locating PCM With Torque Specifications
    G08155489
  7. Install in the reverse order of removal.
  8. When replacing the PCM on the vehicles, perform the following: