LEMON Manuals: Even more car manuals for everyone

Manifold Absolute Pressure (Map) Sensor/Intake Air Temperature (IAT) Sensor No.2 Removal/Installation

NOTE:
  • Because the IAT sensor No.2 is integrated in the MAP sensor, replacing the IAT sensor No.2 includes replacement of the MAP sensor/IAT sensor No.2.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  3. Disconnect the MAP sensor/IAT sensor No.2 connector.
  4. Remove the MAP sensor/IAT sensor No.2.
    Fig 1: Identifying MAP Sensor/IAT Sensor No.2
    G08155538
  5. Install in the reverse order of removal.