LEMON Manuals: Even more car manuals for everyone

DTC Inspection

NOTE:
  • Because the ion sensor is integrated in the ignition coil, replacing the ion sensor includes replacement of the ignition coil/ion sensor.
  1. Connect the M-MDS to the DLC-2.
    Fig 1: Identifying DLC-2 Location
    G08155571
  2. Perform the DTC inspection using the M-MDS. (See ON-BOARD DIAGNOSTIC TEST .)
    • If any DTC related to the ignition coil/ion sensor is present, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE .)