LEMON Manuals: Even more car manuals for everyone

Heated Oxygen Sensor (Ho2S) Removal/Installation

WARNING:
  • A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  3. Lift up the vehicle.
  4. Remove the clip from the member.
    Fig 1: Removing Clip From Member
    G08155555
  5. Disconnect the HO2S connector.
  6. Remove the HO2S using the SST  .
    Fig 2: HO2S And SST With Torque Specifications
    G08155556
  7. Install in the reverse order of removal.