LEMON Manuals: Even more car manuals for everyone

Air Fuel Ratio (A/F) Sensor Removal/Installation: Notes

WARNING:
  • A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0] .)
  3. Disconnect the A/F sensor connector.
  4. Remove the wiring harness from the wire clip. (See ASSEMBLY OF WIRING HARNESS TO WIRE CLIP NOTE .)
    Fig 1: A/F Sensor Wiring Harness
    G08155549
  5. Remove the A/F sensor using the SST  .
    Fig 2: A/F Sensor And SST With Torque Specifications
    G08155550
  6. Install in the reverse order of removal.