LEMON Manuals: Even more car manuals for everyone

Manual Transaxle Installation Note

WARNING:
  • Install the transaxle carefully, holding it steady. If the transaxle falls it could be damaged or cause injury.
  1. Set the transaxle on a jack and lift into place.
  2. Install the transaxle mounting bolts.
  3. Adjust the SST  (49 C017 5A0) so that the engine is located at the specified position.
    Fig 1: Lifting Transaxle On Jack
    G06732744Courtesy of MAZDA MOTORS CORP.
  4. Install the brake hose to the bracket as shown in the illustration and install the clip.
    Fig 2: Installing Brake Hose And Clip
    G06732745Courtesy of MAZDA MOTORS CORP.