LEMON Manuals: Even more car manuals for everyone

Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System]: Notes

WARNING:
  1. Remove the driver-side front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  2. Remove the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the hood release lever. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  4. Remove the upper panel. (See UPPER PANEL REMOVAL/INSTALLATION .)
  5. Remove the shift knob (MTX). (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  6. Remove the selector lever knob (ATX). (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  7. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  8. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION .)
  9. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  10. Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
  11. Remove in the order indicated in the table in illustration.
  12. Install in the reverse order of removal.
  13. If the steering lock component is replaced, perform programming for the immobilizer system related parts. (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM] .)
    Fig 1: Steering Wheel And Column Replacement Components With Torque Specifications
    G06731285Courtesy of MAZDA MOTORS CORP.