LEMON Manuals: Even more car manuals for everyone

DTC P2504:00: Notes

DTC P2504:00 (L3 WITH TC) DETECTION CONDITION & POSSIBLE CAUSES

DTC P2504:00 Charging system voltage high
DETECTION CONDITION 
  • The PCM determines that the generator output voltage is above 18.5 V  or the battery voltage is above 16.0 V  for 5 s  while the engine is running.

Diagnostic support note 
  • This is a continuous monitor (other).
  • The MIL does not illuminate.
  • FREEZE FRAME DATA (Mode 2)/Snapshot data is not available.
  • The DTC is stored in the PCM memory.
POSSIBLE CAUSE 
  • Generator connector or terminals malfunction
  • PCM connector or terminals malfunction
  • Short to power supply in wiring harness between generator terminal D and PCM terminal 1AW
  • Generator malfunction
    • Short to power supply in field coil control circuit at generator
  • PCM malfunction
G06731692Courtesy of MAZDA MOTORS CORP.