LEMON Manuals: Even more car manuals for everyone

DTC Reading Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select "Self Test".
      2. Select "Modules".
      3. Select "PCM".
    • When using the PDS (Pocket PC)
      1. Select "Module Tests".
      2. Select "PCM".
      3. Select "Self Test".
    Fig 1: Identifying DLC-2 Connector
    G06731592Courtesy of MAZDA MOTORS CORP.
  3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS screen.
  4. Verify the DTC according to the directions on the M-MDS screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection. (See DTC TABLE .)
  5. After completion of repairs, clear all DTCs stored in the PCM, while referring to "AFTER REPAIR PROCEDURE". (See AFTER REPAIR PROCEDURE .)