LEMON Manuals: Even more car manuals for everyone

Auto-Dimming Mirror Removal

  1. Remove the rain sensor cover. (See RAIN SENSOR REMOVAL/INSTALLATION .)
  2. Remove the rain sensor. (See RAIN SENSOR REMOVAL/INSTALLATION .)
  3. Disconnect the auto-dimming mirror connector.
    Fig 1: Identifying Auto-Dimming Mirror Connector
    G06731855Courtesy of MAZDA MOTORS CORP.
  4. Make a tool as shown in the illustration using wire.
    CAUTION:
    • Using the tool with bare hands can cause injury. Always wear gloves when using the tool.
    • To prevent damage to the lens, do not use a flathead screwdriver.
      Fig 2: Identifying Tool
      G04971178Courtesy of MAZDA MOTORS CORP.
  5. Insert the tool to the position shown in the illustration and press the center part of the spring.
    CAUTION:
    • Perform the procedure while being careful not to damage the lens.
      Fig 3: Inserting Tool To Position
      G06731857Courtesy of MAZDA MOTORS CORP.
  6. Pull out the rearview mirror toward the vehicle rear.
    CAUTION:
    • When removing the rearview mirror, it may hit the headliner and cause a damage. Hold the rearview mirror with hands and be careful not to contact it with the headliner.
      Fig 4: Pulling Out Rearview Mirror Toward Vehicle Rear
      G06731858Courtesy of MAZDA MOTORS CORP.