LEMON Manuals: Even more car manuals for everyone

Liftgate Lock Actuator Inspection

  1. Disconnect the negative battery cable.
  2. Remove the following parts
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    4. Liftgate latch and lock actuator (See LIFTGATE LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
  3. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
    Fig 1: Inspecting Latch Lever Condition
    G06731986Courtesy of MAZDA MOTORS CORP.
  4. Apply battery positive voltage and connect the ground to each terminal, and then verify the operation.
    Fig 2: Liftgate Lock Actuator Circuit Diagram
    G06731987Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the liftgate latch and lock actuator.
      LOCK ACTUATOR OPERATION CHART

      Lock actuator operation Terminal
      B+ Ground
      RELEASE D B