LEMON Manuals: Even more car manuals for everyone

Brake Fluid Level Sensor Inspection

WARNING: This page is about a different car, the 2010 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the brake fluid level sensor connector from the master cylinder.
  2. Inspect for continuity according to fluid level between the brake fluid level sensor terminals.
Fig 1: Checking Brake Fluid Level Sensor Continuity Chart
G04955661Courtesy of MAZDA MOTORS CORP.
Fig 2: Identifying Brake Fluid Level Sensor Connector Terminals
G05985151Courtesy of MAZDA MOTORS CORP.